天美MV乌鸦MV星空MV果冻MV|白晶晶mv果冻免费|九一制片制作白晶晶|九一果冻制品厂更新|九一果冻制作厂白晶晶

The solution of no image in the video during the use of 2D vision measuring software

1. Check whether the CCD is powered on.

Method: Judge from CCD indicator, or use a multimeter to measure whether the voltage has a voltage input, DC12V.

2. Check whether the vision cable is plugged into the wrong input port.

3. Check whether there is a vision card driver.

Method:

A. Right click “My computer”—“Attributes”---“Device manager”—“Sound and video game controller”, and then check whether the driver corresponding to the vision card is installed.

B. Pay attention to select the driver consistent with the CCD signal output port and whether the computer system is 32-bit or 64 bit when installing the drive during the use of SV2000E vision card.

4. Modification of the port mode of “config” file:

Method: Right click the software icon, click “Open in the original document”, find “sysparam” from the “config” file and open it with doube-click. When SDk2000 card is used, 0=PIC,1=USB Type=0. When SV2000E is used, Type=10.

5. Image settings in the software:

Method: Right click in the image area of software and select the camera system from “Image source setting”. The camera system is divided into N system (imported) and P system (domestic) CCD.